Avnan Electro manufactured 110V - 120V 15amp control board for central vacuum power units. PCB card type mounted controls include 24 volt transformer, 125 volt relay and 15 amp manual resetting circuit breaker. Universal solid-state design has no control circuits or firmware and can be used with any single or dual motor 120V (50/60HZ) central vacuum of 15amps or less. Includes through-the-wall low voltage receptacle with green LED power indicator and through-the-wall push button circuit breaker.

Fits round vacuum canisters 11" in diameter or larger. A set of female leads for the low-volt controller are wired to the board for use with a built-in utility inlet or manual override switch, if needed. Low-volt receptacle can be desoldered from the board if not needed for connections or mounting. Provision for two motor system is provided however the total power consumed by the combined motors must be less than 15 amps.

The universal CVS controller can be used in most any power unit under 15 amps. Stable mounting is required, either with through-the-wall connections or user supplied mounting system. PCB measures 3" X 3" square. Circuit breaker post is .44" diameter and low-volt post is .75" diameter and are approximately 2.0" apart center-to-center. Requires 1/4" flag female connectors (not included) for wire attachments. Guaranteed to be free from manufacturing defect by replacement for 90 days, non returnable.

Sold 1 each. Includes locking nut for low-volt post and circuit breaker. Printed wiring diagram included.