Tested, Inspected & Certified.
This CVS-I kit includes the components needed to install one Hose Magic Systems in a specially designed kit. The CVS-I install kit includes intrasystem fittings and install accessories. All CVS-I install kits use the finest available ASTM 2158 compliant materials from the industry's best manufacturers including Hayden, Vaculine, Beldin, Panduit and Jabat.

All intrasystem fittings and 2" CVS-PVC tube used in CVS-I install kits are IAPMO UMC compliant and all wire and cable ties are UL approved. Every CVS-I Do-It-Yourself central vacuum install kit comes with install manuals and video on CD that can be viewed on your PC or printed for easy reference along with additional instructional materials and product video. And for safe delivery CVS-I install kits include professional packaging for both the fittings and tube, using custom packaging that protects the pipe ends from chipping and damage in transit.

Bonus CVS Tube Offer
If your CVS install is going to require more tube than is included in our regular kits you can add a bonus CV-T100B 20 stick (98 ft.) bundle of pipe to any CVS-I kit order for only $69.99. The bonus bundle add-in offer saves an additional 23% ($20.00 off) our already discounted CVS tube pricing. There is a limit of 1 bonus bundle per CVS-I kit ordered and it must be purchased on the same order as the CVS-I kit.

	2" PVC Vacuum Tubing (ASTM-F2158 / UMC) Central Vacuum Systems use a specially designed and specially sized pipe to carry air and debris to the power unit, which is also the collection system that is remotely mounted usually in an attached garage, basement or utility room. CVS-PVC is sized differently than waste or water pipe at 2 inches outer diameter. This prevents someone from accidentally using the wrong pipe, and more importantly insures you achieve the correct airflow without clogging. CVS-PVC is an extruded pipe much like regular PVC with a special smooth bore interior. IAPMO certified ASTM-F2158 CVS-PVC is currently available from only two manufactures including Vacdepot's PVC extruder, Jabat Inc. All Vacdepot Vacuum tubing is sold in 4'11" (59 total inches) sections referred to nominally as a "5 foot stick". Our new 5' sticks are easy to handle, easy to transport and easy to use on the job in attics, service paths, crawl spaces and other tight areas.
	18/2 Power Limited (low volt) UL Approved Wire The low volt wire in a central vacuum system is used to signal the power unit (suction motor) from the wall inlet. Our 18 gauge 2 conductor wire is UL approved for power-limited applications including central vacuum signaling. Our wire is rolled for easy dispensing and the stronger 18 gauge makes for easy pulling. In most installations the signal wire is run next to the pipe system to enable easy inspection of the signal wire. Wire lengths can be spliced with wire nuts or crimps and electric tape.
	PVC Cement IPS Weld-On PVC710 or equivalent. Clear PVC Cement is a regular-bodied and fast setting PVC for all classes of 2-inch PVC tube. Comes in four ounces metal cans with applicator attached to the lid. One 4 ounce can will cover most applications up to 200 linear feet of pipe and 10 inlets. CVS-PVC cementing tip - apply glue to the male side of the connection (pipe or spigot), not the inside of a fitting where it may build up and degrade airflow. Always use fast-set cement for vacuum systems.
	45° Elbow (ASTM-F2158 / UMC) From Vaculine, the CV5517W 45 degree elbow of white PVC. Makes pipe connections at standard 45 degree angle, safe for intrasystem use (in-wall and attic locations). Also useful for constructing other fittings. Full depth SOCKET type connection on both ends for direct pipe connection. Also available, part CV5519W specialty fitting is a 30° elbow for angles also used commonly in home construction.
	90° Sweep Elbow (ASTM-F2158 / UMC) From Vaculine, the CV5510W 90 degree sweep elbow of white PVC. Makes pipe connections at standard 90 degree angle, safe for intrasystem use (in-wall and attic locations). The sweep elbow makes long radius turns to maintain airflow and prevent blockage intra-system. Full depth SOCKET type connection on both ends for direct pipe connection.
	Stop Coupling (ASTM-F2158 / UMC) From Vaculine, the CV5529W stop coupling of white PVC. CVS pipe fitting which joins two pipes together continuously. Used to create straight pipe runs. Has a center stop to ensure both pipe ends get equal glue surface. Full depth SOCKET type connection on both ends for direct pipe connection.
	Pipe Strap w/Wire Clip From Vaculine, the CV5545W pipe strap with wire clip of white PVC. For mounting and pipe support the CV5545W fits over pipe and screws to a stud. The Vaculine pipe strap also includes a wire clip that provides another convenient spot to keep your low-volt signal wire neat.
	11" Cable Ties UL Approved From Leco the 11 inch cable tie is perfect for securing your low volt wire run to your 2" tubing system. Excellent for areas when pipe is running against studs and the low volt wire cannot be taped. Easy to use "zip-tie" cable fastener is UV stabilized.
	Vacdepot Installation & Products Information CD-ROM (Manuals & Video) Available exclusively from Vacdepot, this installation CD-ROM includes five general installation manuals that cover both new and pre-existing installations, a 17 minute installation video in both windows media and mpeg file formats and product specific manuals including Vacpan and Supervalve instruction sheets. All instructions and manuals are printable from the CD-ROM for use while you're installing. Our installation CD-ROM also includes product information and manuals from Hoover, Beam, Wessel-Werk and more including product videos. An all-inclusive resource that covers every part of a central vacuum installation from novice to experienced do-it-yourselfer.

What's Not Included?
You will need a basic set of tools including a 2.5 inch diameter auger type (preferred) or hole-saw type drill bit. A right angle drill is great if you have it, but not necessary in most installs. Common methods for cutting pipe include miter saw or miter box, any method for making straight cuts - just be sure to always debur your pipe cuts. Other components commonly used in CV installations are standard electrical tape for any low volt splices you may want to make and nail guards. Nail guards are attached to headers or footers where pipe enters a wall. Nail guards prevent others from puncturing your tube system (usually drywall installers). Nail guards are used only in new construction and are available at any hardware store for about $.25 cents each.

CVS-I install kits also do not include a muffler, exhaust vent or any of the optional exhaust finish-out. Many CVS power units now include an exhaust muffler, check your model before you purchase an extra. The optional exhaust outlet (vent) Vaculine item CV5540W is available in the accessories section. Exhausting your CVS is a good idea when possible, but optional.

Vacdepot packs our CVS-I installation kits with the industry's very best quality components, our comprehensive install CD and our decades of CVS experience. Our commitment does not end when the kit is delivered. Vacdepot CV installers are always available to help by phone or email with your questions. Purchasing a CVS-I install kit means you will receive the best components and service in central cleaning systems.

CV-HM1 Does Not Include Any Inlet Valves.